The Camping Gear Connection

A Properly Guyed Out Tent Will Hold Up in High Winds

A lot of us have heard about using guy-lines but, aren’t really sure how to use them or the best way to place them to be effective. Protect your tent from high winds and storms by following some simple guidelines. I personally like the guidelines and illustrations presented by Eureka Tents, these are the guidelines I follow and I would like to share them with you.

When high winds or storms are predicted, do not count on staking alone to keep your tent secure. Depending on the model, your tent rainfly has built-in loops or rings at optimal guyout locations. It’s important to put in the extra time guying out your tent. Correctly done, it can save your tent during harsh weather.

1. Attach parachute cord to the loop/rings and stake them in the ground three or four feet from the edge of the tent. If staked too close to the tent, wind can cause an upward pull that could dislodge the tent stakes.
2. Make sure that the top rainfly is securely attached to the framework underneath. Ties, hook and loop closures, or dog-bones and elastic loops are typical fasteners sewn to the underside of the fly for this purpose.

If your tent does not have loops or rings for guy outs, attach guy lines 1/3 or 1/2 of the way up the framework on the main sidewalls. This enables the guy line to support the lower section of the pole, while the upper pole can flex the side of the guyout. This will prevent all movement except toward the anchor. The idea is to get the guy lines to work together through opposition. See illustrations below: